Building a slider with latest version of OpenSesame

Comments

• sebastiaan

  April 2016 edited 8:04PM

  Hi,

  In OpenSesame 2.9 and before, coordinates were relative to the top-left of the display in inline script, and relative to the display center in sketchpad items. This was clearly inconsistent, so in OpenSesame 3.0, coordinates are by default relative to the display center in all cases.

  So this is why the slider appears at the bottom right--it assumes that 0,0 is the top-left. To fix this, you can either:

  • Change the code so that it assumes display-center as 0,0; or
  • Disable the 'Uniform coordinates' option in the General-properties tab (to revert back to the old behavior).

  Does that help? If want a more specific answer, you'll need to provide some more concrete information about what approach you're trying exactly.

  Cheers,
  Sebastiaan

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• ochowdhury

  April 2016 edited April 2016

  Thanks for your response,

  I'm still a little confused, because I can't seem to find a part of the code that says 'display-center' and i cant find a general-properties tab in the version of OpenSesame that I'm using.

  If I were to use this inline code for a slider that I you posted on an earlier forum post, what would I change to center the slider?

  from openexp.canvas import canvas
  from openexp.mouse import mouse
  my_canvas = canvas(self.experiment)
  my_mouse = mouse(self.experiment, timeout=20)
  
  # Set slider dimensions
  slider_w = 500
  slider_h = 10
  slider_x = self.get("width")/2-slider_w/2
  slider_y = self.get("height")/2-slider_h/2
  
  while True:
  
      # Determine the slider fill based on the mouse position
      pos, time = my_mouse.get_pos()
      x, y = pos
      slider_fill = min(slider_w, max(0, x-slider_x))
  
      my_canvas.clear()
      # Draw some text (this can be anything)
      my_canvas.text("Question goes here", y=slider_y-100) 
      my_canvas.text("Click to accept ...", y=slider_y+100) 
      # Draw the slider frame
      my_canvas.rect(slider_x, slider_y, slider_w, slider_h)
      # Draw the slider fill
      my_canvas.rect(slider_x, slider_y, slider_fill, slider_h, fill=True)                
      # Draw the mouse cursor
      my_canvas.arrow(x+5, y+10, x, y)
      my_canvas.show()
  
      # Poll the mouse for buttonclicks
      button, position, timestamp = my_mouse.get_click(timeout = 20)
      if button != None:
          break
  
  slider_percent = 100.0*slider_fill/slider_w     
  self.experiment.set("slider_percent", slider_percent)
  
• ochowdhury

  April 2016 edited 8:04PM

  Sorry that didn't show up as expected (I'm clearly not used to using this at all), this is what I meant: http://img.cogsci.nl/?q=570c59d642639
• sebastiaan

  April 2016 edited 8:04PM

  i cant find a general-properties tab in the version of OpenSesame that I'm using.

  It's the tab that you see when you click on the top-level item in the overview area, where you can change the name, resolution, etc.

  I can't seem to find a part of the code that says 'display-center.

  It's this part:

  slider_x = self.get("width")/2-slider_w/2
  slider_y = self.get("height")/2-slider_h/2
  

  It determines the position of the slider relative to the width/2 and height/2, that is, relative to the center (when 0,0 is the top-left.)

  The following is a slight update of the script above. This will work on OpenSesame >= 3, and assumes that Uniform coordinates is enabled (it is by default for new experiments).

  my_canvas = canvas()
  my_mouse = mouse(timeout=20)
  
  # Set slider dimensions. This assumes that 0,0 is the display center, which is
  # the default in OpenSesame >= 3.
  slider_w = 500
  slider_h = 10
  slider_x = -slider_w/2
  slider_y = -slider_h/2
  
  while True:
  
      # Determine the slider fill based on the mouse position
      pos, time = my_mouse.get_pos()
      x, y = pos
      slider_fill = min(slider_w, max(0, x-slider_x))
  
      my_canvas.clear()
      # Draw some text (this can be anything)
      my_canvas.text("Question goes here", y=slider_y-100) 
      my_canvas.text("Click to accept ...", y=slider_y+100) 
      # Draw the slider frame
      my_canvas.rect(slider_x, slider_y, slider_w, slider_h)
      # Draw the slider fill
      my_canvas.rect(slider_x, slider_y, slider_fill, slider_h, fill=True)                
      # Draw the mouse cursor
      my_canvas.arrow(x+5, y+10, x, y)
      my_canvas.show()
  
      # Poll the mouse for buttonclicks
      button, position, timestamp = my_mouse.get_click()
      if button is not None:
          break
  
  # Set the slider response as an experimental variable
  var.slider_percent = 100.0*slider_fill/slider_w     
  

  Cheers!
  Sebastiaan

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• ochowdhury

  April 2016 edited 8:04PM

  Thank you!!
• Eva

  April 2018

  Hi Guys,

  I have a similar question but couldn't directly figure out what to do exactly.
  So basically this is my code (i didn't set up a custom form but I just used a sketchpad)

  

  So basically: "draw textline center=1 color=black font_bold=no font_family=mono font_italic=no font_size=24 html=yes show_if=always text="1 2 3 4 5 6 7" x=564 y=0 z_index=0"

  Is where I set a 1-7 scale. Then people can use the keyboard to answer by pressing whatever number from 1-7.
  I now want to change this to a 0-100 slider where people can use a mouse to give the input.

  I feel like this should be relatively straightforward but it's not obvious to me how to fix it. My python is very limited haha so I googled around and arrived at this point
• sebastiaan

  April 2018

  @Eva This may be useful:

  • http://forum.cogsci.nl/index.php?p=/discussion/4055/

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• Eva

  April 2018

  Hi @sebastiaan thanks !
  I checked with a colleague and basically found out which is also clear from your post that you need to do some real python coding to make it work rather than to have a sneaky way to do it quickly in sketchpad.
  Though I really like your solution where you can basically code the slider first and then integrate it into the sketchpad So thanks a lot!