[Solved] Recording randomized order and using it later for presentation

Comments

• Edwin

  March 2012 edited March 2012

  I think I can answer that for you as well:

  In it's most simple form, the experiment would look like this:

  sequence_experiment (basic sequence, i.e. whole experiment)

  ...inline_script_1 *

  ...sketchpad_welcome (introduction)

  ...loop_items (this is where you add a variable for the 12 items, in this example "number")

  ......sequence_items (plays for every one of the twelve items)

  .........sketchpad_items (display item)

  .........inline_script_2 **

  .........logger_item (to log data of choice)

  ...loop_corresponding (just add twelve cycles, no variables needed!)

  ......sequence_corresponding

  .........inline_script_3 ***

  .........sketchpad_corresponding (to display corresponding item, using [stim] - a variable defined in inline_script_3, see below)

  .........logger_corresponding (log data of choice

  inline_script_1, RUN phase
  global stimage
stimage = [] # define empty list

  inline_script_2, RUN phase
  global stimage
stimage.append(self.get("number")) # add number of displayed item to list

  inline_script_3, PREPARE phase
  global stimage
stim = stimage[self.get("count_inline_script_3")] # set local variable 'stim', to be used in sketchpad_corresponding,
self.experiment.set("stim",stim) # set it so that OpenSesame will be able to use it

  If that's still a bit unclear, here's the code for a sample experiment I just build, showing the same row of numbers (1 to 5 in random order) twice:

  set foreground "white"
set subject_parity "even"
set description "Default description"
set title "New experiment"
set sampler_backend "legacy"
set coordinates "relative"
set height "768"
set mouse_backend "legacy"
set width "1024"
set compensation "0"
set keyboard_backend "legacy"
set background "black"
set subject_nr "0"
set canvas_backend "legacy"
set start "experiment"
set synth_backend "legacy"

  define loop loop_corresponding
set repeat "1"
set description "Repeatedly runs another item"
set item "_sequence"
set column_order ""
set cycles "5"
set order "random"
run sequence_corresponding

  define logger logger_item
set ignore_missing "yes"
set description "Logs experimental data"
set auto_log "yes"

  define sequence experiment
set flush_keyboard "yes"
set description "Runs a number of items in sequence"
run inline_script_1 "always"
run welcome "always"
run loop_item "always"
run loop_corresponding "always"

  define sketchpad welcome
set duration "keypress"
set start_response_interval "no"
set description "Displays stimuli"
draw textline 0 0 "OpenSesame 0.25 'Dashy Darwin'" center=1 color=white font_family=serif font_size=32 show_if="always"

  define inline_script inline_script_1
_run
global stimage
stimage = []
end
set _prepare ""
set description "Executes Python code"

  define inline_script inline_script_3
set _run ""
___prepare__
global stimage
stim = stimage[self.get("count_inline_script_3")]
self.experiment.set("stim",stim)
end
set description "Executes Python code"

  define inline_script inline_script_2
_run
global stimage
stimage.append(self.get("number"))
end
set _prepare ""
set description "Executes Python code"

  define sequence sequence_corresponding
set flush_keyboard "yes"
set description "Runs a number of items in sequence"
run inline_script_3 "always"
run sketchpad_corresponding "always"
run logger_corresponding "always"

  define sketchpad sketchpad_corresponding
set duration "keypress"
set description "Displays stimuli"
set start_response_interval "no"
draw textline 0 0 "[stim]" center=1 color=white font_family=mono font_size=18 show_if="always"

  define logger logger_corresponding
set ignore_missing "yes"
set description "Logs experimental data"
set auto_log "yes"

  define sequence sequence_item
set flush_keyboard "yes"
set description "Runs a number of items in sequence"
run sketchpad_item "always"
run inline_script_2 "always"
run logger_item "always"

  define loop loop_item
set repeat "1"
set description "Repeatedly runs another item"
set item "sequence"
set column_order "number"
set cycles "5"
set order "random"
setcycle 0 number "1"
setcycle 1 number "2"
setcycle 2 number "3"
setcycle 3 number "4"
setcycle 4 number "5"
run sequence_item

  define sketchpad sketchpad_item
set duration "keypress"
set description "Displays stimuli"
set start_response_interval "no"
draw textline 0 0 "[number]" center=1 color=white font_family=mono font_size=18 show_if="always"

  Hope this helps!
  Edwin
• jakubch

  March 2012 edited 7:50AM

  Thanks for your reply, Edwin!

  Well, I have never used an inline_script item before so I look forward to learn something new (when I can get to it - today we are on strike). I'll keep you posted.

  Jakub
• Edwin

  March 2012 edited 7:50AM

  Haha (no offence, you undoubtedly have a good cause, but the general image of scientists being on strike just hit my funny bone), you're on strike? Whatfor?

  Anyhow, you're welcome, good luck and keep me posted indeed!
• jakubch

  March 2012 edited March 2012

  Haha, I can see what you mean. But this wasn't, let's say, a science-strike, it was general strike (Spain). I'm not Spanish but I've been living here for some time now and I decided to join the cause. In fact, it was more like a gesture then anything else since the legislation in question has been already approved.

  Anyway, back to our experiment: I have tried the easy way and copied your code into fresh new experiment's script editor. The result after clicking apply was that all the items you defined appeared in the dust bin without any kind of structure. I tried to recreate the structure you described here. Apparently I'm doing something wrong:

  Variable 'number' is not set in item 'sketchpad_item'.
You are trying to use a variable that does not exist. Make sure that you have spelled and capitalized the variable name correctly. You may wish to use the variable inspector (Control + I) to find the intended variable.

  Also, I edited the items so that they follow the definitions in the code you provided. I get just the welcome screen and this:

  An unexpected error occurred, which was not caught by OpenSesame. This should not happen! Message:
unsupported operand type(s) for -: 'int' and 'str'

  Could you provide an .opensesame script?
• Edwin

  March 2012 edited March 2012

  Yeah, sure! Here it is: http://www.cogsci.nl/esdalmaijer/remember_sequence.opensesame. Or see here, right click on it and download it to your pc.

  Please let me know if you've got it, so I can take it off-line again (it's not really supposed to be there ).
• jakubch

  March 2012 edited 7:50AM

  Got it, and it does work. Thanks!

  Let's see if I can find the mistake I made, and more importantly (at the moment) - adapt it for my experiment. I let you know (since I smell some more issues... )
• Edwin

  March 2012 edited 7:50AM

  No problem! Good luck and keep me posted
• jakubch

  March 2012 edited 7:50AM

  Ok, so it works (using variable "number" to record the order and "stim" to recall it - if I got it right). Now, what if I want to use the previously recorded order again? The intention is:

  1. Presentation phase (where the random order is recorded)
  2. Immediate recall phase (where it is replayed - so far so good)
  3. Delayed recall & recognition - reproduce the once recorded order again - here is where I fail

  As for the third point, I simply tried to add the inline_script_3 item again before the delayed recall sketchpad (which is supposed to display the same set of images as in phase 2) to be able to recall the order, but I get the following mistake:

  Error: Inline script error
In: inline_script_3 (prepare phase)
Line: 2
Python traceback:
IndexError: list index out of range

  I have also tried to put the inline_script_2 item after the first immediate recall sketchpad (my thinking being - let's record the order again and again recall it), but it just repeatedly displays only one of the images.

  As I don't understand really how those 2 scripts work, it's difficult to modify them to get this work. Hint appreciated.
• Edwin

  March 2012 edited 7:50AM

  Ah, yes, I can see how that could be a problem. In the third inline, I used the OpenSesame default variable count_inline_script_3 to call a specific entry in our list (with the pictures that had high scores). This count goes up one every time inline_script_3 is run, which is perfect for the first time we use it (since it then calls stimage[0], stimage[1], stimage[2] etc. up to the final entry (stimage[4] in my example).

  The second use of that same inline_script_3, however, will cause OpenSesame to keep counting from where it left of, so now it will call stimage[5], which does not exist. Simple solution: add an inline_script_4, copy-paste everything from inline_script_3 and adjust the bit where it says 'count_inline_script_3' to 'count_inline_script_4'.

  Hope this helps!

  P.S. I'm writing this from an Android emulator on PC, lol!
• jakubch

  March 2012 edited March 2012

  Perfect! Solved.
  I intent to learn a bit more about Python when I have some time. But if you are not too busy, you could write a few words about how those scripts work - I imagine there is something to establish the new variables, then assigning a values etc but it would be great to have it described a little bit.

  Btw, in your note to the experiment, you are talking about calling the .bmp files during the presentation phase as file[number].bmp where [number] is the variable. However, I simply use the variable I had used originally [surname] which has values sur1 sur2...sur12 and it works without explicitly using the variable [number] in any (sketchpad) script. Then in "corresponding sequence" I use sur[stim].bmp in the sketchpad's script. The results are the same.

  Does this mean that I can delete the whole [surname] variable and use the [number] variable instead? E.g., to write sur[number].bmp in the presentation sketchpad script?
• Edwin

  March 2012 edited 7:50AM

  Yeah, that's exactly what it means! If you look at the script of a sketchpad that presents a picture, you'll see something like this:

  draw image 0.0 0.0 "[picname].bmp" scale=1.0 center=1 show_if="always"

  but you might as well change "[picname].bmp" to "picture[number].bmp". And since we're already using the number-variable, this would mean having to put less effort into making the experiment.

  And I'll gladly tell you a bit more about the scripting, although it's fairly self-explanatory and quite basic (but, then again, that's the perfect stuff to begin with).

  inline_script_1

  global stimage
  stimage = [] # define empty list

  line 1: usually, when you create a variable within an inline_script, it is only callable within that script. There's a couple of ways to extend the range. One of them is declaring it as a global variable (callable throughout the entire experiment). You simply do this by typing 'global variablename', as you can see above.

  line 2: by typing 'variablename = 1', you van assign an integer to your variable. Other possibilities include strings (stringvariable = "string" or stringvariable = 'string'), floats (floatvariable = 1.5), tuples (tuple = (1,2,3) ), lists (list = [1,2,3] ) and dictionaries (dictionary = {"key1":"value1","key2","value2"} ). In this case, we set up an empty list ('[]'), since we're going to use the function for adding values to a list in the next inline_script.

  inline_script_2

  global stimage
  stimage.append(self.get("number")) # add number of displayed item to list

  line 1: again, we declare 'stimage' global, so we van use it in our inline_script even though it was created in another.

  line 2: this is the function for adding values. It works by simply putting it behind a variable, like this: 'variablename.append()'. You van put the stuff you need added to your list in between of the brackets. In this case, this is the current value of the variable 'number'. For this, we can't simply call 'number', though, since it was set globally and we're trying to use it locally in this inline_script. For this, you can use the 'self.get("variablename")'-command. 'self.get()' first looks for a variable locally and then checks if it exists globally

  inline_script_3

  global stimage
  stim = stimage[self.get("count_inline_script_3")] # set local variable 'stim', to be used in sketchpad_corresponding
  self.experiment.set("stim",stim) # set it so that OpenSesame will be able to use it

  line 1: same as before.

  line 2: in the previous inline_script, we made a list containing the numbers in the order they were presented. In this inline_script, were going to use that list to call the same numbers again. By calling 'variablename[x]', we get the value of variablename's position x+1 (since Python starts counting at 0). So, in our case, stimage[0] = 3, if three would have been the first number presented. stimage[1] would provide the second, stimage[3] the third and so on. Of course, adding a variable would do the trick as wel: stimage[var] = 3 if var = 0. Because I was too lazy to add my own counter (and since OpenSesame can do it for me!), we use the 'self.get()'-command again, to access this counter: self.get("count_inline_script_3").

  line 3: the command seen here is quite similar to 'self.get()', only this one is used to set a variable instead of accessing one. It's used like this: 'self.experiment.set("variablename", value)'. In line 2, we created the local variable 'stim' (which contains the number on position 'count_inline_script_3' of the list 'stimage'). Now, we use 'self.experiment.set("stim", stim)' to set global variable 'stim' with value stim.

  In case you wonder: there is a command 'self.set()' too, but this is to assign values to local variables, whereas 'self.experiment.set()' is for global variables. 'self.get()', as stated before, looks at local variables first, but then at the global variables as well. That's why you van use 'self.get()', but probably want to steer clear of 'self.set()' and use 'self.experiment.set()' instead.

  Is this what you had in mind? Good luck with Python! Learning to use it a bit, is really worth the effort.
• jakubch

  April 2012 edited April 2012

  Hi Edwin!

  Thanks for the description! I finally got to it. It is not that self-explanatory for me so I'm glad you have been so thorough explaining it. ;-)

  If I understand correctly, OpenSesame adds 1 to the counter each time inline_script_3 is executed. Resulting value equals position within the list. Corresponding value is then retrieved from the stimage list by putting the counter as a value for stimage variable.

  To my question: Could you for instance introduce new variable that would equal to the script count, and then a conditional statement that would reset it to 1 each time it reaches the end of the list? Following code is most likely wrong but you might get the idea what I mean:

  mycounter = self.get("count_inline_script_3") # to establish the new variable and let it be equal to the script count
If mycounter > 4 then mycounter = 1 # reset mycounter to 1 each time it exceeds 4; in other words, when it reaches 4, it actually goes back to the first position in the list
stim = stimage[mycounter] #

  The purpose of this would be to avoid the necessity of renaming the script each time you want to use it (so during the first repetition, you would use the same inline_script_3 as in, say 10th repetition). Does this make sense?
• Edwin

  April 2012 edited 7:50AM

  Yeah, that makes sense! And your code is about right, but it's probably easier to set up your own counter from the start if you plan to do things like this (so the code will look a bit different).

  At the beginning of your experiment, put up an inline_script saying something like this:

  global mycounter # makes counter accessible in other inline scripts
  mycounter = 0 # set up counter

  Better still: add it to inline_script_1:

  global stimage
  global mycounter
  
  stimage = []
  mycounter = 0

  inline_script_2 is the same. Inline_script_3 will look like this:

  global stimage
  global mycounter
  
  if mycounter > 4:
      mycounter = 0 # reset to zero, since Python starts counting at 0, not at 1
  
  stim = stimage[mycounter] # set local variable 'stim', to be used in sketchpad_corresponding
  self.experiment.set("stim",stim) # set it so that OpenSesame will be able to use it
  
  mycounter += 1 # add one to the counter
  # this is actually the same as 'mycounter = mycounter + 1' (which you may use as well, but 'mycounter += 1' is simply shorter)

  Makes sense? Good luck!

  Edwin