[solved] Breaking a loop by key press? How do I do that?

Comments

• eduard

  November 2014 edited 11:35AM

  Hi,

  First of all, welcome to the Forum! The easiest way to learn about Opensesame (and some python), if you do one of the tutorials (e.g. this one).

  What you can do is defining a variable that is True if you want to run a loop and False if not. Then you only have to monitor your keypresses and set the variable to Falseas soon as space is pressed.

  As for the code you'll need an inline_script before the loop you're talking about, in which you can initialize your breaking variable:
  breaking_variable = True

  and another inline_script in the end of your loop sequence (preferably in its run_phase) in which you can set the variable to False, if the response is 'space'.

  if exp.response == 'space':
      breaking_variable = False
  

  Finally, you have to set the run if fields to [breaking_variable] = True, for every element in the loop.

  If you get stuck, ask again with your specific problem or have a look on the documentation of Opensesame. Most of the information you need, you can find somewhere there.

  Good luck,

  Eduard

  
• kitkatzz5

  December 2014 edited December 2014

  Hello Eduard, Thank you so much for you fast response. I did the tutorials before and that's the way I figured out how to use the program it's just I got stuck at this point because I have to use Python coding which just confused me haha.

  I understand defining the variable to change stimuli or get the right or wrong response but I don't know how I can define a variable the way you said: so "it is True if I want to run a loop and False if not." Everything else I did as you said. Can you help me with that?

  Basically I'm recreating a visual experiment where a participant needs to see differences between two stimuli where one have been altered and press space bar when they see the change and to report verbally where the change was. I created a loop with 12 variables that has another loop altering one variable with the original image and the modified version and basically I want the variables changing when they recognized the change (pressed space bar). I made the stimuli to alter but I cant make it stop by pressing a key.

  Here's basically what I did.
  

  Thanks again for your help,
  Kat
• eduard

  December 2014 edited 11:35AM

  Hi Kat,

  So you want this loop, in which you present modified and unmodified images alternatively to break, as soon as participants indicated per keypress that they saw the change?

  If so, I recommend you simplify your Imageloop_sequence a bit. Instead of showing every image in a sketchpad you can move stimulus presentation to an inline_script, because otherwise you would have to include as many inline_scripts as you have sketchpads. The code below, put in an inline_scriptshould be enough to replace everything inside your sequence. I didn't test it very thoroughly though. Probably you have to adjust some things. Also, please make sure that everything what you need is logged!

  
  from openexp.canvas import canvas
  from openexp.keyboard import keyboard
  
  # open canvas for every different screen you want to present
  image1_canvas = canvas(exp)
  image2_canvas = canvas(exp)
  blank_canvas = canvas(exp)
  
  # Determine the absolute path for your files:
  path1 = exp.get_file(u'get-started.png')
  path2 = exp.get_file(u'step1.png')
  
  # draw each of the canvases
  image1_canvas.image(path1)
  image2_canvas.image(path2)
  blank_canvas.fixdot(500,500) # or whatever your blank looks like
  
  # add a keyboard object to be able to log keypresses
  my_keyboard = keyboard(exp, keylist=['space'])
  while True:
      t1 = ti.time()
      image1_canvas.show()
          # "time" defines how long you'll see the image
      key, end_time = my_keyboard.get_key(timeout= 500) 
      if key == 'space' or t1-t0 > 5:
          exp.set('response', key) #set response in logger
          break
      image2_canvas.show()
      key, end_time = my_keyboard.get_key(timeout= 500)
      if key == 'space' or t1-t0 > 5:
          exp.set('response', key)
          break
      blank_canvas.show()
      key, end_time = my_keyboard.get_key(timeout= 500)
      if key == 'space' or t1-t0 > 5:
          exp.set('response', key)
          break
  

  Good luck,

  Eduard

  
• kitkatzz5

  December 2014 edited 11:35AM

  thank you a bunch for your help!!
• Pia

  June 2017

  Hi eduard,
  I tried what you described here. So, in order to break a loop, I put breaking_variable = True in an inline-scripte before the loop, and an inline-script containing
  if exp.response == 'space': breaking_variable = False
  in the last position of the loop (in the loop is just one sketchpad). Then I put [breaking_variable] = True in the run-if block of the sequence.
  However, my experiment does not run at all, the error message says "The variable 'breaking_variable' does not exist."
  What did I do wrong?
  Thank you!
• eduard

  June 2017

  Hi Pia,

  Your experiment does not run because [breaking_variable] refers to var.breaking_variable, not breaking_variable. See what I mean?

  Btw. Not that it matters, but it is a little unintuitive that your loop runs if breaking variable is True and breaks when it it False.

  Eduard

  
• Pia

  June 2017

  Hi eduard,
  thank you. I think I understand, but when I change braking_variable (in the inline-scripts only) to var.breaking_variable I get the following error:
  AttributeError: response not found
  So I changed the duration of the sketchpad to 0 (instead of keypress) and included a keyboard_response-item.
  But I still get this error-message!
• eduard

  June 2017

  Hi Pia,

  The script I wrote 2014 didn't really work.

  This makes more sense:

  from openexp.canvas import canvas
  from openexp.keyboard import keyboard
  
  # open canvas for every different screen you want to present
  image1_canvas = canvas(exp)
  image2_canvas = canvas(exp)
  blank_canvas = canvas(exp)
  
  # draw each of the canvases
  image1_canvas.text('path1')
  image2_canvas.text('path2')
  blank_canvas.fixdot(500,500) # or whatever your blank looks like
  
  # add a keyboard object to be able to log keypresses
  my_keyboard = keyboard(exp, keylist=['space'])
  t0 = clock.time()
  while True:
      t1 = clock.time()
      image1_canvas.show()
          # "time" defines how long you'll see the image
      key, end_time = my_keyboard.get_key(timeout= 500) 
      if key == 'space' or t1-t0 > 5000:
          exp.set('response', key) #set response in logger
          break
      image2_canvas.show()
      key, end_time = my_keyboard.get_key(timeout= 500)
      if key == 'space' or t1-t0 > 5000:
          exp.set('response', key)
          break
      blank_canvas.show()
      key, end_time = my_keyboard.get_key(timeout= 500)
      if key == 'space' or t1-t0 > 5000:
          exp.set('response', key)
          break
  

  Btw. Are you aware that the script takes care of both stimulus presentation as well as response collection? So if you want to combine it with a sketchpad you have to be careful to not mix things up and get into trouble.

  Does that make sense? Feel free to upload your experiment, if you can't get any further.

  Eduard

  
• Pia

  June 2017

  Hi eduard,
  thank you! However, I have only one sketchpad therefore I didn't use that script in the first place. I only included the inline-scripts to define the variable and to break the loop.
  So, I have a sketchpad, which is in a loop and the position of a rectangle of the sketchpad changes with each iteration of the loop. Participants should be able to break the loop if they feel it is at the right position.
  I'll upload my experiment. It is the first loop, I'm working on.
• eduard

  June 2017

  Hi Pia,

  I felt free to implement your design in an inline_script. I tried first to make it work with sketchpads and loops but it wasn't really working. Sorry for that. The good thing though, is that this implementation is really easy and rather intuitive.

  Let me know if anything is unclear.

  Eduard