[SOLVED] Parallel port trigger to EEG Biosemi is not working (Windows 7 64bit)

Comments

• Jarik

  May 2016 edited 6:14PM

  Hi Neuropacabra,

  Managed to get this working by downloading the Binaries only from http://www.highrez.co.uk/downloads/inpout32

  Unpacking the Win32 folder.

  Running InstallDriver.exe as Admin

  Copy the file inpout32.dll from Win32 to c:\Windows\SysWOW64\ and rename it to dlportio.dll

  Best,
  Jarik

  I tested this on Windows 7 64 bit with OpenSesame 3.0.7 using inline script: http://osdoc.cogsci.nl/devices/triggers/#using-dportiodll-in-a-python-inline-script-windows-only
• _Bob

  June 2016 edited 6:14PM

  neuropacabra: does it work already?
• neuropacabra

  July 2016 edited 6:14PM

  Hello Jarik and _Bob!

  Thank you for support. Unfortunately it still doen't work for me. I downloaded binaries you posted and installed as you suggested. I completely unistall OpenSesame before and install 3.0.7 version.

  I even tried due to some post to insert that renamed file dlpotio.dll into root of OpenSesame folder. It didn't help eighter.

  I did basic experiment where are four stimuli and in between fixation cross. After that I send triggers.

  At the begining of the epxeriment I put into prepare section initialization of LPT communication.

  

  Then I null the trigger at the begining like this:

  

  Then I send at every trigger (inline) object this way:

  

  Strange this happens - no warning (e.g., wrong port address, cannot access port etc.) and when I print out the value of port it is weird. This is what I got after run of those four text object while sending triggers:

  

  I dont know if I am sending it to wrong port? Or simply slportio doesn work for my.

  This is my info about LPT from Windows (it dosnt for me at Ubuntu 14.04.4 also)

  

  Thank you for you time and advice

  PS: Here is link to my experiment which I write to test my LPT settings

  
  

  file upload storage

  Warning There was an error rendering this rich post.
• Jarik

  July 2016 edited 6:14PM

  Hi Michael Tesar,

  Some quick thoughts:

  I even tried due to some post to insert that renamed file dlpotio.dll into root of OpenSesame folder. It didn't help eighter.

  The file should be named dlportio.dll (not dlpotio.dll).

  Strange this happens - no warning (e.g., wrong port address, cannot access port etc.) and when I print out the value of port it is weird. This is what I got after run of those four text object while sending triggers:

  If you use try like documented here you should get a warning when try fails.

  And last but not least:
  Could you try using port = 0xCFF8 instead of port = 0x378

  Best,
  
  Jarik
• neuropacabra

  July 2016 edited 6:14PM

  Jarik, thank you for your super-quick reply. I really appriate it.

  I get only this error:

  

  Warning There was an error rendering this rich post.
• neuropacabra

  July 2016 edited July 2016

  Well maybe is problem somewhere in my code...

  Warning There was an error rendering this rich post.
• neuropacabra

  July 2016 edited 6:14PM

  Jarik, you are genius! Thank you. I did not double check dll. File name was OK but I had two version (one from documentation and from you). I installed yours and put the one from documentation to OpenSesame root.

  It just work like a char with the one from you. Thank you very much!

  Warning There was an error rendering this rich post.
• Raluca_Szekely

  July 2016

  Hi, guys! I have a similar issue with Biopac MP150 (trying to send triggers to Acknowledge recordings for ECG and EDA). I'm running on Win 7 x64 bit, have both Open Sesame and the parallel plug-in up to date. I recently installed a PCI express card (Delock, Oxford chipset); driver is up to date and the port is functional (checked with LPT port test utility). Also, I went through all the steps described in the Open Sesame documentation...but if I enter the port adress 0xD010 (this is the adress I found in the Device Manager) in the trigger init, I get the following message when I attempt a test-run:
  I'd be very greateful if anyone could share some thoughts on what this means/how could I fix it... Thank you very much!
• Jarik

  July 2016

  Hi Raluca_Szekely,

  Maybe this post helps:
  http://forum.cogsci.nl/index.php?p=/discussion/comment/7519/#Comment_7519

  Best,
  Jarik
• Raluca_Szekely

  July 2016

  Thank you, Jarik, for the quick reply! Did try that and it did not work, but I will try installing everything again, see how it goes Best, -Raluca
• Jarik

  July 2016

  Hi Raluca,

  I see the link in: http://forum.cogsci.nl/index.php?p=/discussion/comment/7519/#Comment_7519 is dead.

  You can now use: http://osdoc.cogsci.nl/3.1/manual/devices/parallel/#using-dportiodll-in-a-python-inline-script-windows-only

  I would like to advise you to first try to get LPT triggers to work with inline script. If that works you could try the plugin.

  Jarik
• Raluca_Szekely

  July 2016

  Awesome, I will do that first then...Big thanks! - Raluca