OpenSesame 0.27 "Frisky Freud" available

Comments

• Jákup

  December 2012 edited 12:07AM

  Awesome!
  Thanks guys, and keep up the good work!

  Best regards,
  
  Jákup
• martinc

  December 2012 edited 12:07AM

  Great! I've updated the package for Arch Linux (https://aur.archlinux.org/packages/opensesame/) and added Expyriment (python2-expyriment).

  Best,

  --MC
• zzzgarca

  December 2012 edited 12:07AM

  Hello,

  I've just started an experiment and yesterday I've downloaded this new version. I found some bugs when running on WinXP SP3 and I was thinking to let you know about.

  1. When for some reason you have to exit an experiment (while it runs) and you restart it again, then the program crushes and it closes it self. You have then reopen the program and reload the experiment. Version 0.26 running on the same machine does not have this problem.

  2. I've experienced some problems with forms, meaning that when the participants were asked to respond to an open question, the program crushed with and error stating that only Unicode characters are allowed (from my understanding).

  Hope this is useful. I really like this program that's why I want it to get better.
• sebastiaan

  December 2012 edited December 2012

  Thank you for your feedback! It would be very helpful if you could provide some additional information.

  • What distribution of OpenSesame are you using? I.e. the official installer, the Python portable based package?

  When for some reason you have to exit an experiment (while it runs) and you restart it again, then the program crushes and it closes it self. You have then reopen the program and reload the experiment. Version 0.26 running on the same machine does not have this problem

  • Which back-end are you using?
  • Does this issue occur for all experiments, or only some?
  • Does the second run always crash, or does it occur randomly (i.e. sometimes it works, sometimes not).
  • Does this issue only occur when you abort the experiment by pressing 'Escape', or does it also occur when the experiment is completely finished?

  Workaround: For now, you could see if enabling Run experiments in separate process under preferences resolves your issue. If you enable this, opensesamerun will be used to run your experiments.

  I've experienced some problems with forms, meaning that when the participants were asked to respond to an open question, the program crushed with and error stating that only Unicode characters are allowed (from my understanding).

  Could you perhaps be more specific? I.e. do you use a custom form or the form_text_input plug-in, and which input triggers the exception?

  Hope this is useful. I really like this program that's why I want it to get better

  It is, thank you!

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• zzzgarca

  December 2012 edited 12:07AM

  Hi again,

  "Which back-end are you using? "- I'm using PyGame.

  "Does this issue occur for all experiments, or only some?" - I've just tried with only one, is my first experiment with OpenSesame.

  "Does the second run always crash, or does it occur randomly (i.e. sometimes it works, sometimes not)." - It always occurs on the machine I've specified, and on another machine running Windows 8 (by the way, 0.26 and 0.27 with the similar problems like those above, work well on Windows 8; it does give an warning message when you install it as the program is not signed).

  "Does this issue only occur when you abort the experiment by pressing 'Escape', or does it also occur when the experiment is completely finished?" - I tested only when pressing escape, the fact is that none of the participants went through all the procedure because of the open questions issue. If I get some time, I'll test it and let you know.

  "Could you perhaps be more specific? I.e. do you use a custom form or the form_text_input plug-in, and which input triggers the exception?" - My bad here, actually I'm using the old questionnaires plugin, open end question. It works in 0.26 with no problems, but crashes in 0.27. No idea which input is triggering the crash. As far as I can tell it does'n matter which one.

  Regards,
• zzzgarca

  December 2012 edited 12:07AM

  Me again, I'm using the official installer.
• sebastiaan

  December 2012 edited 12:07AM

  "Which back-end are you using? "- I'm using PyGame.

  We're aware that this unfortunate issue occurs on some systems. For now, you could use a different back-end or the workaround suggested in my previous post.

  by the way, 0.26 and 0.27 with the similar problems like those above, work well on Windows 8; it does give an warning message when you install it as the program is not signed

  That's good to know! This is the first time I hear of someone running OpenSesame on Windows 8.

  My bad here, actually I'm using the old questionnaires plugin, open end question. It works in 0.26 with no problems, but crashes in 0.27. No idea which input is triggering the crash. As far as I can tell it does'n matter which one.

  If you give more specific info, I might be able to suggest a workaround. But in general, I would simply use the form plug-ins. They are much better - the questionnaire plug-ins are deprecated and will no longer be actively maintained (by me anyway).

  • http://osdoc.cogsci.nl/forms/

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• zzzgarca

  December 2012 edited 12:07AM

  Hey again,

  I've re-installed the 0.27 version and this is the error I get with the questionnaire plug in: unsanitize() expects first argument to be unicode, not "". I got this error only with regular letters, so no special characters. I state here that I build the experiment in 0.26 and now I'm trying to run it in 0.27 if that makes any difference.

  I tried what you suggested "Running experiments in separate process" and seems to be ok on Windows 8, I'll try it also on XP and let you know if I still get the problem.

  Now, another bug, for both the new and the old version, I don't know if you are aware of it, is the fact that if I'm running and experiment and I try to exit during a timeout stimulus (like a text display or a sketchpad that has a preset time) the program crashes and also Windows most of the times (in such a manner that explorers dos not work and I have to shut it down directly form the power button, or in some cases form the shut down menu in the task manager).

  Thanx a lot for your support!
• zzzgarca

  December 2012 edited 12:07AM

  Ok,

  My last post: it seems that the "Running experiments in separate process" solved also the crash of the program when trying to exit while presenting a stimulus with preset time. Although, I have to wait till the preset time expires.
• sebastiaan

  December 2012 edited 12:07AM

  Regarding the questionnaire plug-ins, the updated version of the plug-in pack should be compatible with OpenSesame 0.27:

  • http://osdoc.cogsci.nl/plug-ins/questionnaire-plug-ins
  • https://github.com/smathot/opensesame_questionnaire_plugins/tags

  I emphasize, though, that these plug-ins will no longer be actively maintained, so for new experiments forms are a much better choice!

  • http://osdoc.cogsci.nl/forms/form-functions/

  Cheers!

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• Jákup

  February 2013 edited 12:07AM

  Is there a Frisky Freud release scheduled for Mac OS?

  A lot of people at our university department are using Macs, and I'm just wondering if I should have them just running from source instead of using version 0.26.

  Best regards,
  
  Jákup
• sebastiaan

  February 2013 edited February 2013

  Hi Jákup,

  I'm afraid that there are no Mac OS packages for 0.27 in the pipeline, at least not that I'm aware of. Running from source is an option. If you manage to do that, you can probably also build a package for your colleagues, so that not everyone needs to have the entire environment installed (installing the source environment is the hard part). Please see this post, where Anthony asked a similar question:

  • http://forum.cogsci.nl/index.php?p=/discussion/comment/1275#Comment_1275

  Cheers!
  Sebastiaan

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• chrplr

  February 2013 edited 12:07AM

  Hello!

  I have just installed openssame under Ubuntu 12.04.

  In the GUI, many icons are missing (showing a barred red circle);
  This may be related to the fact that python setup.py install ended with:
  error: can't copy 'resources/theme/gnome/os-custom-icons'

  Any suggestion?

  (also, a small side remark: a previous attempt to install locally with "python setup.py install --user" crashed because the installer wnated to coppy resources files in /usr/share)

  Best,

  Christophe
• sebastiaan

  February 2013 edited 12:07AM

  Hi Christophe,

  I'm not sure about the error message, but it sounds like you need to install gnome-icon-theme-full (for the gnome theme) or faenza-icon-theme (available from this repository, for the default theme), as described here:

  • http://osdoc.cogsci.nl/getting-started/getting-opensesame/

  If this doesn't resolve the issue, let me know, and please also provide some more details about how you installed OpenSesame (i.e. which command exactly).

  Cheers!
  Sebastiaan

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• chrplr

  February 2013 edited 12:07AM

  Hello Sebastian

  I downloaded withgit clone, then ran python setup.py install --user which failed because of the attempt to write in /usr/share, then with python setup.puy install which yielded the message:

  error: can't copy 'resources/theme/gnome/os-custom-icons'

  The package gnome-icon-theme-full is already installed on my computer.

  No big deal, I had not notice that you had a deb package
  I have just installed it and now the icons are fine.

  Thank you!

  Christophe