Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Supported by

How do I obtain coordinates from a participant's clicks? (Also: Image size on different computers)

Hello,

I am a beginner in OpenSesame and am trying to learn what participant's perceive as the central point or value of different portions of an image. I want to set up my experiment such that when the participant clicks with their mouse/trackpad it will enter into the log file as an x,y coordinate. Is there an easy way to do that?

Side points:

Will there be issues in logging responses if some participants use a trackpad vs a mouse?

I was working with Psychtoolbox when looking at coordinates in my image before and the coordinate system starts in the upper left corner while I believe in Opensesame it starts at the centre at 0,0.What is an easy way of reversing this?

Will the image that appears be different on different computers and their respective screen sizes(Mac, Linux, Desktop comps.. and would that affect the coordinates in any way?


Thank you so much in advance

Comments

  • Hi rozemun,

    You always get the x,y coordinate for mouse clicks.

    See: https://osdoc.cogsci.nl/3.3/manual/python/mouse/ and https://osdoc.cogsci.nl/3.3/manual/response/mouse/

    As far as I know, OpenSesame does not recognize whether the mouse responses comes from the touchpad of a laptop or an additional USB mouse. What I know is that both works fine.

    You can always change the x and y coordinates by adding/subtracting a certain value (the difference of the center and left upper corner).

    You need to be careful with the image size. It can be different on different computers. That's what I do:

    • make images that are pretty small so that they fit an small laptops too 960x720.
    • use Xperiment backend
    • on Win10 set the screen resolution to 100% (Linux, Win7, Mac does not need this)

    Hope that helps,

    Stephan

  • Thank you so much Stephan! That makes sense. I see the cursor_x and cursor_y coordinates now. However, I have the same image repeating a number of times and I want to log separate x,y coordinates for each click on each iteration of the image. However, whenever I run it, it does not log all the cursor_x,y positions. It only logs a few of them... I am wondering if they are being rewritten or whether I have not defined my desired output in the loop! If you have any advice on how best to log each click as individual x,y coordinates I would be grateful!

    Also, the experiment runs fine on my computer and saves on an excel file but when I run it on the browser after it has run the screen turns white and the data is not stored anywhere. I figure this must be some server issue related to OSweb.. I am not sure how best to proceed.


    Thank you for your response,

    Rozemun

  • Hi @rozemun ,


    Could you attach your experiment (by clicking the paperclip icon) so that we can have a look?


    Cheers,


    Lotje

    Did you like my answer? Feel free to Buy Me A Coffee :)

  • Hi,


    I figured out the issue! thank you!

    Now I am struggling with this issue:

    I am recording participant clicks aka: cursor_x & cursor_y positions of my images. However, when I share this experiment online different participants will have different computers and therefore different screen resolutions. So when they select points the coordinates of cursor_x and cursor_y will be very different across participants and will not give me consistent information that I need.

    Is there a way I can either define/fix the resolution so I know that the coordinates will be the same across participants or is there some calculation I can do to scale points across resolutions to make them consistent...


    Does this make sense?

    Thank you in advance!

  • Hi,

    If you divide the x coordinate by the half of the width, and the y coordinate by half of the height, you should get a measure of the relative eccentricity of your mouse clicks, that is independent of the screen dimension.

    Note, I say half of width/height, because these variables span the entire screen from left to right edge (top to bottom edge). But since the Zero point is in the middle of the screen, the maximal number the width can get is half the size of the variable var. width.

    I hope this makes sense.

    Good luck.

    Eduard

    Buy Me A Coffee

  • Hi Eduard,

    But the width and height will depend on the computer and specific resolution of each participant's computer right? And that is something I will need to establish/ask each participant before I can do any calculation?


    Thanks for your response,

    Rozemun

  • Opensesame creates those variable automatically I believe. So, can you check in your logfile, whether you have the variables width and height included? If this does not work, you might be able to choose some conservative screen resolution (1280,1050 or something like this). If I am not mistaken the rest of the screen will be then simply filled with the background color (or black), and the experiment will be restricted to the specified area. Like this you will still have variability with regards to different resolutions, but at least the dimension won't be a problem anymore.

    Unfortunately, I don't think it is possible to read out online what the screen features are and adapt the window accordingly.

    Buy Me A Coffee

  • Hi Eduard,


    Thank you for your response. So I kept that in mind and sent a version of my experiment as a JATOS link to my supervisor who uses a Lenovo Thinkpad with a resolution of 2560 X 1440 and my Mac on the other hand has a different resolution on which the experiment was designed. So not only does the experimental screen not fit completely in her browser(She has to scroll up and down to see the complete image), the coordinates are different on her computer.

    So basically I asked her to click the same place for each trial to obtain x,y coordinates from her computer and I clicked the same place during each trial on my computer. What I found out was that both of our X-coordinates were the same but the Y-coordinates were different(around a 100 pixel difference). Since the X,Y coordinates are the most important feature of my experiment I am trying to figure out how to standardise this across different screens. I am thinking it's also possibly because when I am sending her a link the browser is not opening in the size it should hence the coordinates are messed up on the y-axis...

    Any advice regarding this issue would be appreciated!


    Thank you so much,

    Rozemun

  • Hi Rozemun,

    I am surprised that it doesn't fit the screen. Have you set the experiment to run in full screen (settings in general tab, and F11 in the browser)?

    What I found out was that both of our X-coordinates were the same but the Y-coordinates were different(around a 100 pixel difference).

    That is also a bit weird, since this would suggest that the aspect ratio of the images was not retained. Did the image look weird for one of you?

    So far, I haven't worked with JATOS, and only the try-in-browser version of OSweb, so I'm not really sure what is going on.

    Eduard

    Buy Me A Coffee

  • Hi,


    When you say set the experiment to run in full screen, do you meant on Jatos I set that beforehand? Are these settings set on OpenSesame on my computer or someplace else?


    Best,

    Rozemun

  • Hi Rozemun,

    I don't know whether you can set those things in JATOS. I did it in the general settings tab of Opensesame:

    There change this line:

    set fullscreen no

    to

    set fullscreen yes

    Buy Me A Coffee

  • Hi,


    Thank you for that advice! I will implement it. Would you by any chance know how I can make the cursor appear without having to click the screen. So I am recording the mouseclicks and when the image appears the cursor isn't there till I click the screen and then I can click again and it moves onto the next image.

    Ideally the cursor would appear upon presentation of the image and the participant would only need to click once till it shifts to the next image.


    Best,

    Rozemun

  • Hi,

    There are a couple of methods to adjust cursor visibility. I can never remember which is the one that works. Probably set visible true, but maybe check the forum for some older discussions. For example here:

    If you run it on Jatos, you can't use the mouse object though (in an inline_script), instead you have to set it in the sketchpad that you are using (I think).

    Not sure whether this here helps at all. I hope it does!

    Eduard

    Buy Me A Coffee

  • Okay great thanks!

    I want to use this recommendation: 'set visible true' in the inline script but every time I add any code into the inline script it doesn't save and when I click somewhere else and come back to the inline script the change isn't implemented even though I had previously clicked the 'apply' button.

    Also where do you recommend I add 'set visible true'.. in the collect mouse response form, the individual sketchpads, or in the general script at the very start?

    I don't know why I am having so many small small issues that don't get resolved!!

    Thank you in advance!!

    Rozemun

  • Hi @rozemun ,


    I want to use this recommendation: 'set visible true' in the inline script but every time I add any code into the inline script it doesn't save and when I click somewhere else and come back to the inline script the change isn't implemented even though I had previously clicked the 'apply' button.


    There's a few things here:

    Firstly, OpenSesame code like this line doesn't go in an inline_script item (which takes Python or JS code) but in the script of the mouse_response item (and not in the preceding sketchpad). But I think this is what you did do, right?

    Secondly, can you try to use the line

    set show_cursor yes
    

    instead of

    set visible true
    

    ?


    Finally, did you make sure the duration of the item preceding the mouse_response item (probably a sketchpad?) is set to 0? (And not to 'mouseclick', for example?


    If you still keep having this issue, could you upload your experiment here?


    Cheers,


    Lotje

    Did you like my answer? Feel free to Buy Me A Coffee :)

  • Hello,


    Perfect that worked! I had not set the duration of the sketchpad to 0, I had set it to mouseclick hence I was having to click it twice!


    Now all that remains is making the clicks consistent across different resolutions. So far when my supervisor clicks the same spot as me she is not getting the same x,y coordinates unfortunately.


    Thank you for your help,

    Rozemun

Sign In or Register to comment.

agen judi bola , sportbook, casino, togel, number game, singapore, tangkas, basket, slot, poker, dominoqq, agen bola. Semua permainan bisa dimainkan hanya dengan 1 ID. minimal deposit 50.000 ,- bonus cashback hingga 10% , diskon togel hingga 66% bisa bermain di android dan IOS kapanpun dan dimana pun. poker , bandarq , aduq, domino qq , dominobet. Semua permainan bisa dimainkan hanya dengan 1 ID. minimal deposit 10.000 ,- bonus turnover 0.5% dan bonus referral 20%. Bonus - bonus yang dihadirkan bisa terbilang cukup tinggi dan memuaskan, anda hanya perlu memasang pada situs yang memberikan bursa pasaran terbaik yaitu http://45.77.173.118/ Bola168. Situs penyedia segala jenis permainan poker online kini semakin banyak ditemukan di Internet, salah satunya TahunQQ merupakan situs Agen Judi Domino66 Dan BandarQ Terpercaya yang mampu memberikan banyak provit bagi bettornya. Permainan Yang Di Sediakan Dewi365 Juga sangat banyak Dan menarik dan Peluang untuk memenangkan Taruhan Judi online ini juga sangat mudah . Mainkan Segera Taruhan Sportbook anda bersama Agen Judi Bola Bersama Dewi365 Kemenangan Anda Berapa pun akan Terbayarkan. Tersedia 9 macam permainan seru yang bisa kamu mainkan hanya di dalam 1 ID saja. Permainan seru yang tersedia seperti Poker, Domino QQ Dan juga BandarQ Online. Semuanya tersedia lengkap hanya di ABGQQ. Situs ABGQQ sangat mudah dimenangkan, kamu juga akan mendapatkan mega bonus dan setiap pemain berhak mendapatkan cashback mingguan. ABGQQ juga telah diakui sebagai Bandar Domino Online yang menjamin sistem FAIR PLAY disetiap permainan yang bisa dimainkan dengan deposit minimal hanya Rp.25.000. DEWI365 adalah Bandar Judi Bola Terpercaya & resmi dan terpercaya di indonesia. Situs judi bola ini menyediakan fasilitas bagi anda untuk dapat bermain memainkan permainan judi bola. Didalam situs ini memiliki berbagai permainan taruhan bola terlengkap seperti Sbobet, yang membuat DEWI365 menjadi situs judi bola terbaik dan terpercaya di Indonesia. Tentunya sebagai situs yang bertugas sebagai Bandar Poker Online pastinya akan berusaha untuk menjaga semua informasi dan keamanan yang terdapat di POKERQQ13. Kotakqq adalah situs Judi Poker Online Terpercayayang menyediakan 9 jenis permainan sakong online, dominoqq, domino99, bandarq, bandar ceme, aduq, poker online, bandar poker, balak66, perang baccarat, dan capsa susun. Dengan minimal deposit withdraw 15.000 Anda sudah bisa memainkan semua permaina pkv games di situs kami. Jackpot besar,Win rate tinggi, Fair play, PKV Games