[solved] SMI eye-tracker & backend

Comments

• Edwin

  April 2013 edited 8:50PM

  Hi elizabeth,

  You could use any of the back-ends OpenSesame provides. As a matter of fact, we are currently working on plugins that should work with iViewX (although I can't promise that these will be finished within the time course of your study).

  I do not know why the SMI website specifically mentions PsychoPy. In my experience, PyGame (on which the legacy back-end is based) works equally well with SMI-trackers as PsychoPy does. This is mostly due to the fact that PsychoPy and PyGame are primarily used for displaying stimuli on the computer's display, whereas the iViewX API is used for communicating with your eye tracker.

  If you have any practical questions, please do not hesitate to ask.

  Best,

  Edwin
• Evertox

  April 2013 edited 8:50PM

  Hi Edwin,

  Our department are about to purchase a new eyetracker. Yesterday we had a demonstration of an SMI RED500 and a Tobii TX300.

  Whilst the instructors mentioned using other experimental software including PsychoPy and E-Prime, it was unclear whether Opensesame could be supported.

  Looking through COGSCIdotNL website, I came across this link:-

  http://files.cogsci.nl/documents/posters/mathot_schreij_theeuwes_opensesame_ecem2011.pdf

  It mentions here that the Tobii and Smi devices can be supported using the 3rd party's SDK.

  Alongside the development of an iViewX plugin, do you intend to create a plugin for the Tobii system in the future?

  This may decide on what system we intend to purchase in the near future.

  Thanks

  Anthony
• Edwin

  April 2013 edited April 2013

  Hi Anthony,

  In general, every eye tracker that has a Python library could be used together with OpenSesame. Usually, manufacturers that give out SDKs include a dll that is usable through Python, meaning that a lot of eye trackers, in theory, are compatible with OpenSesame. As long as you have the know-how to implement their functions.

  Tobii provides support for Python (http://www.tobii.com/en/eye-tracking-research/global/products/software/tobii-analytics-software-development-kit/tobii-software-development-kit/), but I do not have concrete plans for creating a plug-in for Tobii devices (mostly because I do not have access to one at the moment). Of course, on the long run, I would like to see plug-ins for as many eye trackers as possible. But I do not see it happening in the near future (unless somebody else is willing to work on it).

  The SMI plug-in is currently being developed using a RED-m as a testing device. It should work with other SMI-devices as well, since it's build on top of the universal SMI SDK, but no tests have been conducted yet!

  A sidenote on the poster you're referring to: we're going to be at ECEM 2013 as well, with OpenSesame plug-ins for both SMI and EyeLink devices (I even hope to give a demonstration, using SMI's RED-m).

  Good luck on choosing a device!

  Best,

  Edwin
• elizabeth

  April 2013 edited 8:50PM

  Thanks Edwin, that is good to know. I will try it as is and see how it goes.
• Edwin

  July 2013 edited July 2013

  Hi @Evertox and @elizabeth,

  Update on the SMI functionality: a general eye-tracker plug-in is now available via GitHub, that should work with all iViewX based SMI devices (it is written on top of the SMI iViewXAPI).

  I have tested it on a SMI RED-m, using both the PyGame and PsychoPy back-ends. Both work beautifully! (apart from two small notes, see below) Feel free to download the plug-ins, test them and share your experience. I welcome all feedback!

  As I mentioned before: we will present this at ECEM this year (August 16th, during the Hardware poster session) and we'll probably have a demonstration setup.

  Best,

  Edwin

  NOTE: when using PsychoPy, the first attempt to calibrate will not work, since (for reasons I cannot yet grasp) the display isn't 'taken over' properly by iViewX. Solution is as simple as it is stupid: close the calibration screen on the first attempt, then press 'q' on the first drift check; this opens the calibration screen again, and now everything will work nicely.

  NOTE: when using PyGame, sometimes (seemingly random) after switching from iViewX display back to experiment display, the experiment is minimized (i.e.: the desktop is visible, not the experiment). The solution is simple: just click on the experiment in the task bar. This will bring forward the experiment again, and everything will work normally.
• sebastiaan

  July 2013 edited 8:50PM

  That looks great man! =D>

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• AZeater

  December 2013 edited 8:50PM

  Hey @Edwin,

  I'm using a RED500 with a 2 PC setup (a stimulus PC with OpenSesame and another PC with the RED500 connected to it) and have attempted to use the generic plugins but get an error saying "instance of libsmi.libsmi does not have attribute sampleRate" or something along those lines.

  It can't be a connection issue as I'm able to remotely control the eyetracker fine so I was wondering if you knew what it could possibly be?
• Edwin

  December 2013 edited December 2013

  Hi!

  Nice to hear that somebody is using this! Are you using the EyeTracker plug-in, or the libsmi one from Sebastiaan? If you are using mine, would you be able to tell me what is in the Debug window? If the connection did fail for some reason, there should be output in there saying either one (but most likely the latter) of the following:

  "Error in libsmi.libsmi.init: failed to get system information (and then a more elaborate error message)"

  "Error in libsmi.libsmi.init: establishing connection failed (and then a more elaborate error message)"

  Cheers!
• AZeater

  December 2013 edited 8:50PM

  Hahaha I'm using the one that you supplied (and linked to) and it seems the problem is the fact that I'm using a 2 PC setup. There's only one input field for IP address in the plugin and I took a brief look at the code in libsmi and saw that the same IP address was being using for both listening and receiving.

  Hardcoding the IP addresses of both computers seemed to rectify the issue. Now I'm having problems with getting the accuracy data after verification. Same error as before, except now the error is dealing with attributes not existing and in particular "accuracyData" does not exist.

  Any help with that would also be helpful!
• Edwin

  December 2013 edited 8:50PM

  Ah, good that you mention this! Earlier testing was done on a single PC-setup and a setup that did in fact use the same IP for sending and receiving. In fact, I wonder what your setup looks like... Are you receiving data from the SMI on one PC, and then sending commands for the SMI to a second PC?

  Anyhow, the problem you have might very well be due to a shortcoming in SMI's Python bindings. If you look for a file called 'iViewXAPI.py', it should have the same contents as you can see here. If this is not the case (more specifically: if you are missing the CAccuracy struct), then simply add what is missing. That is: the CAccuracy class definition AND the bit where it says accuracyData = CAccuracy(0,0,0,0). You can find this in lines 64-68 and 87 in the link that I just mentioned.

  Also, if you are in fact missing the accuracyData, please do report back here, so I can adjust the bundling (on that note: from where did you download the plug-in?).

  Good luck!
• AZeater

  December 2013 edited December 2013

  Thanks for the quick reply Edwin! Yeah it seems the problem was with iViewXAPI.py. Weird that they give us a function to call upon to get accuracy data and then don't include the structure definition in the bindings!

  I downloaded the eye tracking plugin from here. If you're referring to the iViewX python bindings, I got them directly from SMI by emailing them.
• Edwin

  December 2013 edited 8:50PM

  Excellent, so now everything runs as it should?

  You're right, it's a bit odd that some structs (the accuracy one isn't the only one) are missing from the Python bindings. Luckily, it's an easy problem to solve. I have a feeling that the engineers at SMI, and at eye-tracker producers in general, prioritize the code in a language they prefer (usually C/C++), and regard bindings for other platforms as less important. That being said, I do really like the SMI SDK, as it is really easy to use compared to e.g. pylink and the Tobii Python bindings.

  I think I'll include our custom version of the iViewXAPI from now on. Thanks for pointing out the issue!