[solved] Putting "if-clauses" in the Key-response

Comments

• sebastiaan

  September 2011 edited 11:32AM

  The easiest way to achieve this is probably to add an inline_script item (somewhere after the keyboard_response and before the logger) with something like the following code in the run phase:

  if self.get("response") in ["1", "2", "3", "4"]:
self.experiment.set("my_response", "distractor")
else:
self.experiment.set("my_response", "target")

  This will create a new variable "my_response" which is set to "distractor" if the response was "1" through "4" and set to "target" otherwise.

  Hope this helps!

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• Henrik

  September 2011 edited 11:32AM

  Hey,

  I have changed the picture_selecting so that "dist1" is the correct response. "dist1" gets shuffeled with "dist2-4" so the correct response is a number btw. 1 and 4 but the variable "dist1".

  Is there a possability to set
  correct == 0
  if "dist1" set correct = 1 ?

  Best regards and thanks again for your support

  Henrik

  P.S.: I found a bug, if you enter an "illegal" command and Run the script after you get a bugreport. If you close Open Sesame than, without removing the bug, the script can´t be opened again, because it tries to immidiatly run the script which isn´t possible. In that case you ain´t able to open the script to edit it.
• sebastiaan

  September 2011 edited 11:32AM

  I'm afraid I don't quite follow, particularly this bit:

  so the correct response is a number btw. 1 and 4 but the variable "dist1".

  Could you perhaps describe in a bit more detail what you have done and what you want to achieve?

  P.S.: I found a bug, if you enter an "illegal" command and Run the script after you get a bugreport. If you close Open Sesame than, without removing the bug, the script can´t be opened again, because it tries to immidiatly run the script which isn´t possible. In that case you ain´t able to open the script to edit it.

  Thank you! That's a serious bug indeed. It would be very helpful if you could describe the exact steps that will reproduce the problem (either here or on the issue tracker).

  Btw, perhaps it's good to know that you can open the .opensesame.tar.gz files with a program like WinRar. So even if OpenSesame fails to open the files (which it shouldn't, of course), you can still edit the experiment.

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• Henrik

  September 2011 edited 11:32AM

  Hey,

  to part2 yes i found that out quite soon, so it wasn´t such a loss.
  The exact problem was that i entered a line in a sketchpad ,and saved it, that couldn´t be executed. After i got the bugreport i closed OpenSesame. As i tried to open the Script, OpenSesame immidiatly tried to run the Script, which wasn´t possible. It gave me the bugreport but didn´t open the script, so i couldn´t remove the false line.

  To my problem discription:

  The programm now shuffles 100 numbers, each number has 5 pictures.
  Than draws 40 of them and displays them in the 2 different phases, the pictures names are for example 41a, 41b, 41c, 41d, 41e. In the display phases Picture 41a and Picture 41b get displayed.
  In the recall phase picture 41a gets displayed on top off the other 4.
  Picture 41b gets shuffeled into the 3 distractors (41c, 41d, 41e). I defined the "correct" picture as "dist1". But since they get shuffeled it is allways a different number.
  I hope i managed it to explain it now, my english isn´t perfect ;(.

  Best regards

  Henrik
• sebastiaan

  September 2011 edited 11:32AM

  Ah, I think I understand now. There is a variable "dist1", which has a value between 1 and 4, depending on where the target picture was presented. So "response" has to match "dist1". Is that correct?

  There are two ways to do this:

  1) The easiest way is probably to enter [dist1] in the correct response field of the keyboard response.

  2) A more flexible way is using an inline scipt. Something like this should do the trick:

  if self.get("dist1") == self.get("response"):
self.experiment.set("correct", 1)
else:
self.experiment.set("correct", 0)

  The exact problem was that i entered a line in a sketchpad ,and saved it, that couldn´t be executed. After i got the bugreport i closed OpenSesame. As i tried to open the Script, OpenSesame immidiatly tried to run the Script, which wasn´t possible. It gave me the bugreport but didn´t open the script, so i couldn´t remove the false line.

  Could you perhaps be even more specific? In order to address the issue I really need a step-by-step description of what you did and what happened as a result, including the exact error messages and the line of script that causes the problem. Thanks!

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• Henrik

  September 2011 edited 11:32AM

  Okay,

  exact discription is: (Only tried it with Sketchpads so far but should happen on all in-line scripts).

  "Error: Script error
  Description: Failed to instantiate module 'sketchpad' as 'zweiterTeil': Error: Script error
  Description: Unknown command ' # cookies'"

  If you enter in a sketchpad # (text) and try to run it you will get that bug. If you saved before you run it and close the programm while the "bug-window" is open, OS will try to run the script and instead of opening your script will give you this bugdiscription:

  "Error: Failed to open 'C:/Users/Henrik Ho/Desktop/Uni/Praktika/erstes Praktikum Pulsschlag-Zeit bei Leistung/es-geht!.opensesame.tar.gz'
  Description: Error: Script error
  Description: Failed to instantiate module 'sketchpad' as 'zweiterTeil': Error: Script error
  Description: Unknown command ' # cookies'

  Make sure that the file is in .opensesame or .opensesame.tar.gz format. If you should be able to open this file, but can't, please go to http://www.cogsci.nl/opensesame to find out how to recover your experiment and file a bug report."

  Without opening the script.

  Okay and for the "if-clause" i think i havn´t defined the variable correctly.

  target = num + "a.bmp"

  dist1 = num + "b.bmp"
  dist2 = num + "c.bmp"
  dist3 = num + "d.bmp"
  dist4 = num + "e.bmp"

  That is how i have defined it. Picture with "b" is allways correct. But if i enter your suggested textline or keyboard response i get a bug, saying:

  "Error: Inline script error
  In: inline_script (prepare phase)
  File "libopensesame\item.pyo", line 302, in get

  Python traceback:
  runtime_error: Error: Runtime error
  Description: Variable 'dist1' is not set in item 'inline_script'."

  You are trying to use a variable that does not exist. Make sure that you have spelled and capitalized the variable name correctly. You may wish to use the variable inspector (Control + I) to find the intended variable.

  Full traceback in debug window"

  Best regards

  Henrik

  Once more thanks for your really good support!
• sebastiaan

  September 2011 edited 11:32AM

  It's important to know that not all Python variables are automatically recognized by OpenSesame with the "[variable]" notation. Specifically, OpenSesame only recognizes variables that are properties of the experiment object. In practice, this means that you should use the get() and set() functions to manipulate variables that you want to use elsewhere in OpenSesame.

  dist1 = num + "b.bmp" # won't work
self.experiment.set("dist1", num + "b.bmp") # will work
print dist1 # won't work
print self.get("dist1") # will work

  You can find more about this here.

  Good luck and thanks for the bug-description!

  
  
  Check out SigmundAI.eu for our OpenSesame AI assistant!
  
• Henrik

  November 2011 edited 11:32AM

  Hey,

  Sorry forgot to say it, works now thank you very much!