Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Supported by

OpenSesame runtime for Android

13

Comments

  • edited 10:53AM

    Hi again!!
    As many people in here I am using open sesame in a smart-phone to run my EMA. I have posted before here and I received immediate help (thanks for that). Unfortunately another problem has now occurred with my experiment. I went through previous posts in this section but I didn't find something that corresponds to my problem. So here it is:
    I have created an experiment which runs in smart-phones (Samsung galaxy). The experiment generally works good, but not always. Some times the app crashes. The problem is that this is entirely random. Some times it works fine. Some times it crashed. Turning the phone off and on again, usually fixed the problem. However I need my app to be stable and work all the time, without the need of my participants to reboot the phone every now and then.... Most of the problems people report here seem to be pretty specific and usually the app does not launch at all in the first place. Mine seems to be quite random.

    I attach here the debagging file of one of the trials that failed:
    /sdcard/opensesame-autorun.yml
    /mnt/sdcard/opensesame-autorun.yml
    Launching resources/android/menu.opensesame
    openexp.sampler._legacy.init_sound(): sampling freq = 48000, buffer size = 1024
    experiment.init_log(): using 'resources/android/defaultlog.csv' as logfile (utf-8)
    experiment.run(): experiment started at Tue May 19 17:58:59 2015
    opened /sdcard/opensesame-settings.txt for reading
    experiment_folder = /sdcard
    logfile_folder = /sdcard
    opened /sdcard/opensesame-settings.txt for writing
    experiment.run(): experiment finished at Tue May 19 17:59:08 2015
    Launching /sdcard/Alc_Stroop 0.1.opensesame.tar.gz
    openexp.sampler._legacy.init_sound(): sampling freq = 48000, buffer size = 1024
    experiment.init_log(): using '/sdcard/subject-23.csv' as logfile (utf-8)
    experiment.run(): experiment started at Tue May 19 17:59:12 2015

    Any ideas what might be the problem?

    Thank you very much in advance!

  • edited June 2015

    I got it working on my ancient Archos Arnova 10b G2!

    Many thanks for also providing the APK (the device does not want to connect to Google Play).

    image

    And I got my first 'experiment' set up:
    https://www.dropbox.com/s/14lbt2ganvidu8w/decision_android.opensesame.tar.gz?dl=0

  • edited June 2015

    Hello everyone,

    Unfortunately, the keyboard response on my Oneplus One (5.0.2) is not working. It does show up but no proper response is collected. I use the swiftkey app to work around this exact issue but it seems to not longer work. I also tried the standard android key board but that does not solve anything.

    Does anyone experience the same problem?

    Ninja edit:it does seem to collect some response "by accident", but only after swiping the screen, with some delay and nowhere near the correct key.

  • edited 10:53AM

    Unfortunately, the keyboard response on my Oneplus One (5.0.2) is not working. It does show up but no proper response is collected. I use the swiftkey app to work around this exact issue but it seems to not longer work. I also tried the standard android key board but that does not solve anything.

    I've noticed as well that the SwiftKey app doesn't solve the issue any more. I guess it has been updated and now uses the same system as the default Android keyboard, thus suffering from the same problem in OpenSesame.

    At the moment I don't have any clue about how this issue can be properly resolved. Perhaps you could browse the Android market for other keyboards (there are many), and report back here if you find one that works? If we know of one that works, then we at least have a temporary workaround.

  • edited 10:53AM

    Hi Sebastiaan,

    I've tried out a few and it seems that both the GO Keyboard and the Smart Keyboard Trial from lexicog LLC work. I would recommend the latter as it covers less screen area.

    How is it going with the portrait oriented version of the app?

  • edited 10:53AM

    I've tried out a few and it seems that both the GO Keyboard and the Smart Keyboard Trial from lexicog LLC work. I would recommend the latter as it covers less screen area.

    Thanks! I've updated the documentation.

    How is it going with the portrait oriented version of the app?

    There are no plans, because I had the impression that there was no real demand. It would be easy enough to do though. I filed an issue on this so that I don't forget (342).

    Cheers,
    Sebastiaan

  • edited 10:53AM

    Woah... I'm a student currently and in my first year of Post Graduation and this is the first time that I have come across Opensesame in my curriculum which led me here. I'm really very uninformed about the whole software and language thingies... But I really hope to benefit from this website and all of you people who know soooo Much! Might be posting silly questions about OpenSesame as this would be my first experiment building so please bear with me...

    Lots of Love and hope...
    Aysha B

  • edited September 2015

    Hi all!!

    I am using the android version of open-sesame to run an experiment in a Samsung Galaxy Ace GT-S5830i, Android version 2.3.6. Participants have to do the experiment multiple times during a week. My problem is that many times the experiment crashes. The crashing seems to happen in a totally random manner. It might happen at any time and at any point of the experiment. So I have no indicator of what might be the cause. The debug file does not give me any specific information (or I am just unable to spot the correct information) and previous posts in this forum do not seem to describe a similar problem.

    Solutions implemented but not fixed the problem completely so far:

    1. Using a newer version of Android.
    2. Erasing staff from phone's memory to create more space.

    Any other ideas?? I know this sounds a bit generic, but any suggestions would be valuable.

  • edited 10:53AM

    Hi,

    I do see a crash in my Google Play developer account. It came in on Aug 18, and is identified as coming from a Droid X device, running OpenSesame 2.9.7, and Android 2.3.3 - 2.3.7. Could that be you?

    From what I can tell, this is a hard crash that occurs somewhere deep down in Android. I don't see any way to address it; it's not a nice Python issue that arises in OpenSesame. I've never seen this before. In fact, this is only the second time that a crash of this type is reported in my developer account.

    What exactly happens when this crash occurs? Does OpenSesame just close without warning or error message? Or do you get an error message, and, if so, which one?

    Cheers,
    Sebastiaan

  • edited 10:53AM

    Hi Sebastiaan,

    many thanks for the reply. No that wasn't me. I am using Samsung Ace, Android 2.3.6. The open sesame version I use it's not the same every time, as I wipe out everything after every participant and install it again.

    Yes it just closes without any message. And the debug file doesn't give me any specific information. When I tried to use it in a newer phone, with a more recent android version and higher memory and processing capacity, it was much better. Not perfect, but considerably better. My Samsung ace has a internal memory of 158MB and a processor of 832MHz. Might these be to low to support an open sesame experiment?

    Another idea proposed by a member of this forum was to make sure that log files are before any audio files in the experimental sequence. Unfortunately that didn't help either.

  • edited 10:53AM

    I'm afraid I'm in the dark then. Your device's specs are somewhat low, but it's difficult to say whether this explains the crashes. You could post the experiment here so I can take a look at it?

  • edited 10:53AM

    If you could do that it would be of great help, many thanks!! Do you want me to just post a picture of the overview structure or do you prefer to send you the file so you can try to run it yourself?

  • edited 10:53AM

    Hi,
    I would liket to use the forms to add button for the android program. But it seems the forms are not compatible with the android runtime. When I add even a form_text_display plug-in in a program, it would crash. However, the widgets function in inline could not help either. The sketchpad showing a pseudo button following a touch_response works, but I would rather use a button in the program. Is there any way to use the forms in android enviroment? Or is there any way to add a touch button? Any suggestion would be grateful.

  • edited 10:53AM

    @amazinger Forms work in the Android runtime as well, so there's probably some other problem. You can find debug output in /sdcard/opensesame-debug.txt, which may help you trace down the issue.

    See also:

  • edited April 2016

    Hi Sebastiaan. Thank you for your reply. Yes the form did work on android when I just used form plug-in for a test. The problem may come from something else, but I couldn't find the problem from the debug file. Here's the content of the opensesame-debug.txt:

    /sdcard/opensesame-autorun.yml
    /mnt/sdcard/opensesame-autorun.yml
    Launching resources/android/menu.opensesame
    openexp.sampler._legacy.init_sound(): sampling freq = 48000, buffer size = 1024
    experiment.init_log(): using 'resources/android/defaultlog.csv' as logfile (utf-8)
    experiment.run(): experiment started at Fri Oct 23 20:41:06 2015
    failed to open /sdcard/opensesame-settings.txt for reading
    experiment_folder = /sdcard/
    logfile_folder = /sdcard/
    opened /sdcard/opensesame-settings.txt for writing
    experiment.run(): experiment finished at Fri Oct 23 20:41:10 2015
    Launching /sdcard/image_fudi_android_jian.opensesame.tar.gz
    openexp.sampler._legacy.init_sound(): sampling freq = 48000, buffer size = 1024
    experiment.init_log(): using '/sdcard/subject-0.csv' as logfile (utf-8)
    experiment.run(): experiment started at Fri Oct 23 20:41:11 2015
    

    Could you tell me what the problem is?

  • PadPad
    edited 10:53AM

    Hi,
    I'd like to buy a tablet (actually my research lab will buy it) for experimental tasks with opensesame, do you have any advice on what tablet should i go for ? I don't have a precise budget yet but i'm pretty sure i will be encouraged to aim as low as i can.

    Pad

  • edited 10:53AM

    @amazinger If you still have this problem, could you upload the experiment somewhere so that I can take a look? It seems that the crash is not registered in the debug file for some reason.

    @Pad I personally bought three 7" Samsung Galabxy Tab 3's for an experiment. Those were cheap (around €100) and work pretty well. It's a while back though. And I have a Nexus 9, which is sweet, but also much more expensive.

  • Hi,
    I developed an experiment with the droid backend which runs well on my laptop, but doesn't work on my tablet. The debugging file indicates : ImportError : No module named numpy

    Is there a way to manually install this python module ?

  • Hi Pad,

    I'm afraid not. numpy is simply not available on Android. You can find a list of all available modules here:

    What do you need numpy for? Perhaps there's a simple way to convert your script so that it uses only the Python standard library.

    Cheers,
    Sebastiaan

  • PadPad
    edited September 2016

    Ok...

    I have this piece of code :

    import numpy as np
    import scipy.interpolate
    def interpolate_points(x,y):
    
    
        if (len(x)<3 or len(y)<3 or len(x)!=len(y)):
            raise Exception('Bad length x or y in interpolate()')
    
        dist = np.sqrt((x[:-1] - x[1:])**2 + (y[:-1] - y[1:])**2)
        dist_along = np.concatenate(([0], dist.cumsum()))
    
        # build a spline representation of the contour
        spline, u = scipy.interpolate.splprep([x, y], u=dist_along, s=0, k=2)
    
        # resample it at smaller distance intervals
        interp_d = np.linspace(dist_along[0], dist_along[-1], 10)
        new_x, new_y = scipy.interpolate.splev(interp_d, spline)
    
        for i in range(len(new_x)):
                new_x[i] = int(round(new_x[i]))
                new_y[i] = int(round(new_y[i]))
    
        return zip(new_x, new_y)
    

    Inspired from this thread (see last comment by yurez).

    To understand what i'm working on, see this post

    I'm pretty sure i can find a way to replace numpy handy functions, but it will be tougher for scipy functions so i will probably give up trying to interpolate.

  • edited September 2016

    It seems you have a few options:

    • Abandon interpolation
    • Reimplement the scipy functions in pure python (difficult, but not impossible)
    • See if someone else has already done this elsewhere.
    • Consider using JavaScript, instead of OpenSesame, to program your experiment. This would mean implementing your whole paradigm using HTML5/JavaScript and running it using the android browser, or packaging it as an app using PhoneGap. If you do this, you could use d3.js for the spline interpolation (example)
  • edited November 2016

    Hello all,
    I've a Nexus 9 with Android 7; OpenSesame after the installation gives me the following error:
    "Could not extract private data" and then the program crash.
    Do you have any suggestion?
    Thanks,
    Paolo

  • edited November 2016

    I've a Nexus 9 with Android 7; OpenSesame after the installation gives me the following error: "Could not extract private data" and then the program crash.

    Not yet, no. I actually have a Nexus 9 myself, but I don't have it with me at the moment. When I have it again, I'll see if I can reproduce the problem. In the meanwhile, do you have other Android 7 devices that you can test, to see if the same happens there?

  • No, I have only this device.

  • Hello, Sebastiaan, I restored my Nexus 9 to 6.0.1 and now OpenSesame is working.

  • I have my own Nexus 9 again, and for me everything works fine after updating to Android 7 (including all the monthly minor updates). So fortunately it doesn't seem to be a general problem with Android 7.

    Did you perhaps run out of storage space after the update? That seems consistent with the error message. (Although it could have been anything, really.)

  • Hi Sebastiaan,

    thanks for OpneSesame! I only encountered it yesterday and it is very comprehensive and handy. The Android player works fine on my Samsung Galaxy SIII.

    However, for kind some experiments it might be desirable to make starting an experiment and obtaining the results using the Android player easier. Let me paint a picture how it could eventually work and let me know what you think about it. Is it possible? Is it feasible or even desirable?

    In my personal dream a person would walk past a notice advertising my experiment, would stop, get his mobile out, scan a QR-Code, the app would be started passing it a URL encoded in the QR-Code, the app would wget the experiment file from there and start it.

    After finishing the experiment the app would ask the participant for consent to send us the results and do so (maybe by generating and sending a mail, or something).

    I'm well aware of the scientific problems with uncontrolled circumstances that might arise. This would not be feasible for most psychological experiments. But for some these circumstances might be acceptable.

    Best Soraltan

  • My nexus was "empty", I installed only updates and Open Sesame.
    For now we continue to use the Android version 6.
    Thanks for your test, Sebastian.

  • edited December 2016

    Hi Sebastiaan,

    Thanks for OpenSesame. I am currently learning to program experiments with it.

    I have a clean Nexus 9 (only google apps and OpenSesame) updated to android 7.1.1 and had the same crashing problem ("Could not extract private data") as @bilancino reported. I am trying to figure out something. If not, I will restore it to 6.0.1.

    Best,
    Ran

  • @soraltan I like your idea. Actually, Sebastiaan has made something similar to what you are thinking. In google play, there is an app written by Sebastiaan named "Play 4 Science 1". Participants (like me) can install the app and do the experiment. Check it out at: https://play.google.com/store/apps/details?id=nl.cogsci.play4science1

    It would be very nice if @sebastiaan could write a tutorial on how to make this kind of app, or there is a tutorial but I failed to notice.

    Best,
    Ran

Sign In or Register to comment.

agen judi bola , sportbook, casino, togel, number game, singapore, tangkas, basket, slot, poker, dominoqq, agen bola. Semua permainan bisa dimainkan hanya dengan 1 ID. minimal deposit 50.000 ,- bonus cashback hingga 10% , diskon togel hingga 66% bisa bermain di android dan IOS kapanpun dan dimana pun. poker , bandarq , aduq, domino qq , dominobet. Semua permainan bisa dimainkan hanya dengan 1 ID. minimal deposit 10.000 ,- bonus turnover 0.5% dan bonus referral 20%. Bonus - bonus yang dihadirkan bisa terbilang cukup tinggi dan memuaskan, anda hanya perlu memasang pada situs yang memberikan bursa pasaran terbaik yaitu http://45.77.173.118/ Bola168. Situs penyedia segala jenis permainan poker online kini semakin banyak ditemukan di Internet, salah satunya TahunQQ merupakan situs Agen Judi Domino66 Dan BandarQ Terpercaya yang mampu memberikan banyak provit bagi bettornya. Permainan Yang Di Sediakan Dewi365 Juga sangat banyak Dan menarik dan Peluang untuk memenangkan Taruhan Judi online ini juga sangat mudah . Mainkan Segera Taruhan Sportbook anda bersama Agen Judi Bola Bersama Dewi365 Kemenangan Anda Berapa pun akan Terbayarkan. Tersedia 9 macam permainan seru yang bisa kamu mainkan hanya di dalam 1 ID saja. Permainan seru yang tersedia seperti Poker, Domino QQ Dan juga BandarQ Online. Semuanya tersedia lengkap hanya di ABGQQ. Situs ABGQQ sangat mudah dimenangkan, kamu juga akan mendapatkan mega bonus dan setiap pemain berhak mendapatkan cashback mingguan. ABGQQ juga telah diakui sebagai Bandar Domino Online yang menjamin sistem FAIR PLAY disetiap permainan yang bisa dimainkan dengan deposit minimal hanya Rp.25.000. DEWI365 adalah Bandar Judi Bola Terpercaya & resmi dan terpercaya di indonesia. Situs judi bola ini menyediakan fasilitas bagi anda untuk dapat bermain memainkan permainan judi bola. Didalam situs ini memiliki berbagai permainan taruhan bola terlengkap seperti Sbobet, yang membuat DEWI365 menjadi situs judi bola terbaik dan terpercaya di Indonesia. Tentunya sebagai situs yang bertugas sebagai Bandar Poker Online pastinya akan berusaha untuk menjaga semua informasi dan keamanan yang terdapat di POKERQQ13. Kotakqq adalah situs Judi Poker Online Terpercayayang menyediakan 9 jenis permainan sakong online, dominoqq, domino99, bandarq, bandar ceme, aduq, poker online, bandar poker, balak66, perang baccarat, dan capsa susun. Dengan minimal deposit withdraw 15.000 Anda sudah bisa memainkan semua permaina pkv games di situs kami. Jackpot besar,Win rate tinggi, Fair play, PKV Games